[Resolved] Debian postinstall problem

BlueMind - EN Discussions
1

I’ve installed BM on debian 7
uname -a
Linux bm-mp 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1+deb7u1 x86_64 GNU/Linux

And dont understand how to do postinstall setup. When i opening https:///setup , ive got server page unavailable.
And there is no apache installed after bm setup script work, uless i’ve installed it by myself, but its not change situation. There is no web interface for bm on debian install, as i understand now.

Is i messed some postinstall config steps for debian variant?
Any help, please?

Andrew

2

What Blue Mind install bin do you use ?

Could you run this command after running install bin and before connecting to /setup and send us command result:

$ dpkg -l|grep bm-

Could you send us install bin log file too (/tmp/<install_bin_name>.log) ?

3

Hello.
Thank you for answer.

  1. “Blue Mind 2.0 Install”

  2. I’m installing BM by executing commands on clean just installed Debian 7 Wheezy:

wget http://pkg.blue-mind.net/2/wheezy/install/bluemind-installer-wheezy.bin
chmod +x bluemind-installer-wheezy.bin
sh bluemind-installer-wheezy.bin
After installation on propose to make final setup
########################################
Blue Mind installation is successful.
Connect to https://bm-mp.megapoligraf.ua/setup/ to complete your setup
########################################
link https://10.1.1.120/setup/ cant be open. 10.1.1.120 - ip of that Debain host.

root@bm-mp:~# dpkg -l|grep bm-
root@bm-mp:~#

I’ve sent you /tmp/bluemind-installer-2.0.10357-wheezy.bin.log in pm.

Andrew

4

It seems that needed packages aren’t found on your Debian installation.

Can you send us content of your /etc/apt/sources.list ?
Does your CD-ROM source available ?

5

Thank you for your replies. My problem was due to unspecified distr network source during debian install.
After fixing that, reinstalling BM, /setup is opened
All works fine. That was my mistakes.
Thanks a lot, and sorry for disturb.

6

Hello, please help, same symptom here, fresh Ubuntu server 12.0.4 LTS installation, installation script seemed to go through just fine but https://server_ip_address/setup gives the message “This page can’t be displayed”. In fact, seems like port 443 has no process listening.

7

check your Yum sources into /etc/yum.repos.d